The selection, installation, and maintenance of cantilever beam sensors significantly impact their measurement accuracy and lifespan. When selecting a sensor, the range should be chosen based on the project's maximum load, and a 30% safety margin is recommended to avoid overload damage. For dynamic load scenarios, the sensor's fatigue life must be considered. The accuracy class should be selected according to application requirements, such as OIML Class C or D. Accuracy is typically characterized by parameters such as nonlinearity and hysteresis error. For laboratory projects, a 0.05%FS high-precision sensor can be used, while 0.5%FS is sufficient for industrial applications. Environmental factors such as humidity, dust, corrosion, and temperature must be considered when selecting the protection level, such as IP65 or IP67, as well as the material, such as alloy steel or stainless steel. Special materials are required for high-temperature environments (>150 度)、コーティングを施したステンレス鋼は腐食性の高い環境で使用する必要があります。
設置方法は、段付き位置決め穴、取り外し可能なフィッティング、ネジ付きインターフェイスなど、プロジェクトの要件に応じて選択できます。信号出力は取得システムと互換性がある必要があります。アナログ信号は強力な干渉防止機能を備えていますが、デジタル信号は長距離伝送に適しています。パソコンやPLCとの接続には、A/Dコンバータを内蔵したデジタルセンサが選択可能です。設置時の偏心荷重を補償するには、鋼球の力伝達コンポーネントまたはダブルボールヘッド構造を内蔵したセンサーが推奨されます。これらのセンサーは、ボール溝とスプリング システムによって偏心した荷重エラーを排除し、取り付けとデバッグを簡素化します。
